Different radiant heating supplies are needed depending on the system’s type. There are two major types of radiant heating systems that you might want to consider for your home: electric or hydronic. Both of these types of solutions can be used for many different solutions and require different supplies for the installation.
Obtaining the proper radiant heating supplies depend on the solution that you are looking for. If you are looking for indoor solutions for warming your home, then you have several things to choose from. If you are thinking about creating the spa feel in the bathroom by adding a towel warmer and a floor warmer, you can. The cost for a towel warmer can run around $700 and for the warming system in the floor $400-$900. Warming the bathroom is a favored system. You can also enjoy heated windows and area warmers for spaces like under your desk or a rug too.
The heated windows warm to 100 degrees when you stand near them and they can run approximately $2500. The area warmers differ depending on what you are looking for and the size of space you are hoping to warm. The prices for the area warmers range from $80-$700.
You can also enjoy outdoor heating that require radiant heating supplies. You can enjoy heating your driveway so you don’t have to shovel anymore. The snow will melt as it falls. These systems run around $15 per square foot. You can also run radiant heating supplies in the gutters or the roof. This makes for a warmer home and you don’t have to worry about the roof caving in during the heavy snows.
The hydronic radiant heating system is favored more than the electric system but the radiant heating supplies are much more expensive. If you are interested in doing a bathroom, then with an electric system you can expect to spend less than $1000. For a hydronic system, you will have to pay $4000 or more.
Although the hydronic radiant heating supplies are favored, they can take up to 8 hours to warm up and they can consume energy if left on for long periods. They also raise the floor slightly which can cause problems if remodeling. Electric heating mats are placed under rugs on the floor so you don’t have to pull up the floor to install them. They also only take less than an hour to warm up. There are many other differences between hydronic and electric radiant heating systems that you might want to consider prior to making a decision that is right for you.
Installing radiant heating supplies for an electric system is easy. The first thing you will do is lay the electric roll on the floor and then apply a layer of thinset cement on top of the electric roll. You will then lay down your carpet or tile and connect the heating roll to an electric circuit. Installing hydronic radiant heating supplies is a little more involved. First, you will need a polyethylene vapor barrier to lay over the compressed ground. You will then add a form of installation and then a wire mesh or metal lath over the insulation. The metal lath is easier for the installation because it helps hold the tubing that is included with hydronic. This is because the tubes are filled with water and the tubes are attached easier with the lath. Once finished with the tubing and all of the hydronic radiant heating supplies, you can lay the flooring you desire.
There are a few differences with hydronic and electric radiant heating solutions because they require different radiant heating supplies that vary greatly in price range. It is important to thoroughly research both options prior to making a decision.
